Ontario drill

DAPNET Forums Archive › Forums › Equipment Category › Equipment › Ontario drill

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 3, 2011 at 2:02 pm #43080
    Marshall
    Participant

    I have an Ontario grain drill I am fixing up for next year. I have the grass seeder off and in working order. The problem is the chart is missing for the settings. Does anyone have a chart I could get a copy of. It says it is a model 13-7. Thanks for any help.

    October 4, 2011 at 11:46 am #69393
    Jim Garvin
    Participant

    I did some web searching and came up with this site….

    http://www.cairnsweb.net/book/ontario-grain-drill-lever-settings/

    It appears you have to supply them with some information before you can download the document. I’ve never used the site, so don’t know what you can expect for results from it. Good luck.

    October 4, 2011 at 6:27 pm #69392
    Marshall
    Participant

    Thanks Jim. I tried the link but for some reason I can’t get it to work. When I click on download it just sits there and does not do anything. I may have to get help from the IT department(wife).

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.