DAPNET Forums Archive › Forums › Equipment Category › Equipment › Looking for a coulter
- This topic has 2 replies, 3 voices, and was last updated 9 years, 10 months ago by
Stone Horse Farm.
- AuthorPosts
- May 20, 2016 at 4:08 pm #88917
Full Circus Farm
ParticipantAnyone have suggestions on where to find a coulter that would fit the bracket on our plow?
The plow is a John Deere and the bracket is for a 1.5 inch diameter shank with a notch/groove in it.
Thanks for any leads! (fullcircusfarm@gmail.com)
MiriamMay 21, 2016 at 5:50 am #88921Donn Hewes
KeymasterI am guessing that plow is a walking plow? It can be hard to fit rolling coulters on some walking plows. but usually it can be done. I have seen a bracket with the groove you describe. Some of these plows came with jointers instead of coulters; but a coulter will work better for plowing sod and such. I would check with “farmer Browns Plowshop”. If you can find a coulter that will work it might come with it’s own bracket.
June 11, 2016 at 5:09 pm #89026Stone Horse Farm
ParticipantYou might try this guy,
He’s also on ebay at
- AuthorPosts
- You must be logged in to reply to this topic.