oliver trailer plow

DAPNET Forums Archive › Forums › Equipment Category › Equipment Fabrication › oliver trailer plow

  • This topic has 3 replies, 3 voices, and was last updated 15 years ago by jac.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 16, 2011 at 3:18 pm #42460
    Ronnie Tucker
    Participant

    ihave used a two bottom oliver trailer plow with a cart. i would like to hook directly to the plow .do i hook the evener in the place that would hook to the drawbar.how would i put a tongue on the plow.ronnie tucker

    February 18, 2011 at 5:17 pm #65797
    jac
    Participant

    Hi Ronnie.. the 1928 “horses-mules for profit” shows a gang plow set up for 5 up. .. the main evener has a 32″offset to the land and 8″ to furrow and is set bang in the middle of the two beams.. best of luck and dont forget the fotos…
    John

    February 22, 2011 at 2:08 am #65796
    Richard
    Participant

    The plow behind the cart not work very well?

    February 22, 2011 at 4:17 am #65795
    Ronnie Tucker
    Participant

    yes it works fine. ijust wanted to take less room on the ends in turning. ronnie tucker

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.